The flash drive needs to be at least 8 GB in size. The procedure should be the same for Catalina. By default, recent versions of macOS block the running of applications from unidentified developers.This was tested using an iMac (21.5-inch, Mid 2011) 2.5 GHz Intel Core i5 with MacOS High Sierra 10.13.6 installed.This differs from the flash drive created using the Disk Utility, which used the Master Boot Record scheme. Finally, click on the Restore button in the popup window.Note: This flashdrive will be using the Apple Partition Map scheme. In the popup window, select restore from Mac OS X Install DVD, as shown below. Finally, click on the Erase button.Highlight the name Untitled, then click on the Restore button on the top of the Disk Utility application window. I chose the default name Untitled. This was done use an iMac (21.5-inch, Mid 2011) 2.5 GHz Intel Core i5 with MacOS High Sierra.Use the Finder application to mount the Snow Leopard ISO file.Use the Disk Utility application to erase the flash drive, as shown below.
Make Linux 10.6.8 Iso And TheDISK=disk2Sudo dd if="$HOME/Downloads/snow leopard install.iso" of=/dev/r$DISK bs=1mUse the command given below to determine the name for the flash drive. If necessary, make the appropriate substitutions. Also, an assumption is made that the identifier is disk2. Here, an assumption is made that the ISO file name is snow leopard install.iso and the file resides in your Downloads folder. Diskutil listEnter the commands given below to create the USB flash drive installer.![]() Mount | grep /dev/sdbEnter the command given below to create the USB flash drive installer. If necessary, make the appropriate substitutions in the rest of the steps. Here, an assumption is made that the name for the flash drive is sdb. If there are mounted volumes, then use the sudo unmount command to unmount them before proceeding. Sig p229 serial number lookupBut then I discovered that the same method I've been using to create bootable linux thumb drives works with the 10.6. Iso files, the instructions above might work on older versions of macOS, but I couldn't get it to work on Big Sur. Sudo dd if="$HOME/Downloads/snow leopard install.iso" of=/dev/sdb bs=1MI couldn't find a method that worked as Disk Utility doesn't cooperate with OS 10.6. If necessary, make the appropriate substitutions. ![]() Iso, some of these are copied from the "grey" disk, which means they're attached to a specific machine and won't allow you to install even though you can still boot into it successfully. I had no issues booting into the installer on my old 2008 MacBook (for those who don't know how, just plug in your USB stick and restart your Mac while holding the option key).Be sure to use a standard installation DVD.
0 Comments
Leave a Reply. |
AuthorNicole ArchivesCategories |